Step 1: Define Instruments/Lots and Tests
You perform the procedures in this step from the QC Setup tab. For more detailed information, see The QC Setup Tab.
If your instrument/lot number and test are already defined in Linearity Web, you can skip this step and go to Step 2: Enter Your Results.
1.
Click the QC Setup tab if not already displayed.
2.
Select a lab number from the drop-down list and click Change Lab Number. (The list will contain your QCNet lab numbers.)
3.
If the instrument/lot combination you want to use does not appear in the list:
•
Click Add a New Instrument/Lot.
•
Make selections for instrument and lot from the drop-down lists.
•
Click Add.
4.
If you need to add a test:
•
Click Edit under Test Setup.
•
Click Add a New Test.
•
Make selections from each of the drop-down lists (analyte, units, method, reagent, decimal places).
•
Click Add.
Go to Step 2: Enter Your Results.